© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 8
Specifications
Description
Spanning tree
Yes
Load balancing
Yes
IPv6
Yes
●
IPv6 host support
●
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2
802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN
Security
WEP/WPA/WPA2
Yes, including Enterprise authentication
Access control
Yes, management access control list (ACL) plus MAC ACL
Secure management
HTTPS
Wi-Fi Protected Setup (WPS)
Yes (soft WPS, no hardware push button)
SSID broadcast
Yes
Rogue access point detection
Yes
Mounting and Physical Security
Multiple mounting options
Desktop installation; mounting bracket included for easy ceiling or wall mounting
Physical security lock
Kensington lock slot
Quality of Service
Quality of service (QoS)
Wi-Fi Multimedia Traffic Specification (WMM TSPEC)
Performance
Wireless throughput
Data rate =300 Mbps; actual client throughput will vary.
Recommended user support
Up to 32 connective users, 20 active users
Configuration
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Multi-Access Point Management
Single Point Setup
Yes
Maximum access points per
cluster
8
Active clients per cluster
80
Management
Management protocols
Web browser, SNMP v3, Bonjour
Remote management
Yes
Event logging
Local, remote syslog, email alerts
Network diagnostics
Logging and packet capture
Web firmware upgrade
Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration
Protocol (DHCP)
DHCP client
IPv6 host
Yes
HTTP redirect
Yes, and captive portal
Wireless
Frequency
Selectable-band 2.4 GHz or 5 GHz (not concurrent)
Radio and modulation type
Single radio, orthogonal frequency division multiplexing (OFDM)
WLAN
802.11n
Operating channels
1 to 13 (depending on country)
Wireless isolation
Wireless isolation between clients
External antennas
None