Connecting Voice Interface Cards to the Network
Related Documentation
19
OL-12847-01
Figure 23
Connecting the 2-Port CAMA Card
Step 3
Connect the other end of the cable to the telephone wall outlet (RJ-11 port).
Related Documentation
For additional information, see the following documents and resources.
•
Low Density Voice/Fax Network Modules for the Cisco 2600, 3600 and 3700 Series Routers
,
data sheet
•
Understanding Direct Inward Dial (DID) Voice Interface Cards
, tech note
•
Voice Hardware Compatibility Matrix (Cisco 17xx, 26/36/37xx, VG200, Catalyst 4500/4000,
Catalyst 6xxx)
, tech note
•
Cisco 4-Port High-Density FXS/DID Analog Voice Interface Card for the Cisco 1700 Series
Modular Access Routers
, data sheet
•
Digital J1 Packet Voice Network Module
, data sheet
•
FXO, FXS, and E&M Voice Interface Card Support on Cisco 1700 Series Routers
•
Understanding 1-Port and 2-Port E1 Multiflex Trunk Voice/WAN Interface Cards (VWICs)
, tech note
•
Cisco Digital 1-port and 2-port T1 Multi-Flex Voice WICs
, tech note
•
Cisco T1/E1 Multiflex Voice/WAN Interface Cards for the Cisco 1700 Series Modular Access
Routers
, data sheet
•
Understanding E&M Voice Interface Cards
, tech note
•
Analog E&M Voice Signaling Overview
, tech note
•
Understanding and Troubleshooting Analog E & M Interface Types and Wiring Arrangements
, tech
note
•
Understanding and Troubleshooting Analog E&M Start Dial Supervision Signaling
, tech note
•
E&M Cable Pinouts to Connect Cisco 1750/2600/3600 E&M VIC to Nortel PBX Option 11 E&M
Trunk
, tech note
Straight-through
RJ-11-to-RJ-11 cable
RJ-11 ports
RJ-11 wall jack
62330
SEE MANUAL BEFORE INSTALLATION
VIC-
2CAMA
IN USE
IN USE
1
0