Chapter 1
Using the Cisco Voice Gateway 200
Where to Go Next
1-14
Software Configuration Guide for the Cisco VG200
78-10322-02
Figure 1-9
Configuring DID on a BRI Port
Where to Go Next
Now that you understand something about the different ways that you can use a
Cisco VG200 gateway, you should proceed to Chapter 2, “Basic Configuration.”
Chapter 2 describes the procedures required to configure your Cisco VG200
gateway, however you choose to use it. Even if you are familiar with other Cisco
products, you should refer to Chapter 2 because the configuration of a
Cisco VG200 gateway is a little different from Cisco routers.
After completing the basic configuration required to use a Cisco VG200 gateway,
you can refer to Chapter 3, “Configuring Voice over IP,” for detailed instructions
about configuring a Cisco VG200 gateway for MGCP or H.323.
IP cloud
48465
BRI port
FXS port
FXS port
Gateway 1
Gateway 2
Gateway 3
