manualshive.com logo in svg

Cisco UC520-8U-4FXO-K9, Getting Started

Share
Download
Cisco UC520-8U-4FXO-K9 Getting Started Download Page 32

32

9

Install a Cisco Catalyst Express 520 for a Cisco Unified

500 Series

Before you install the switch, review the information in the Release Notes for the Catalyst Express 520
Switches on Cisco.com.

Before you power on or install the switch, review the safety information in the

“Warning Definitions”

section on page 32

 and the

“Installation Guidelines” section on page 36

.

The warnings in this chapter are translated into different languages in the Regulatory Compliance and
Safety Information for the Catalyst Express 520 Switches document on Cisco.com.

This section contains basic installation information including the following:

•

Warning Definitions, page 32

•

Installation Guidelines, page 36

•

Desktop Installation, page 37

•

Connect Switch to a Cisco Unified 500 Series, page 38

•

Add Switch to Community, page 38

Warning Definitions

These warnings are translated into different languages in the Regulatory Compliance and Safety
Information for the Catalyst Express 520 Switches document that ships with the switch. Review these
warnings before you power on or install the switch.

Summary of Contents for UC520-8U-4FXO-K9























































Reviews:

No comments

Brands by name

Popular brands

Load more brands