8
Cabling the Cisco uBR10-MC5X20S/U/H Cable Interface Line Card with Universal Cable Holder—UCH2
OL-24878-01
Removing the Cables
Figure 7
Removing the UCH
Removing the Cables
Step 1
Use the T-10 TORX driver tool to loosen the lock bar on the side you want to remove cables.
Step 2
Slide the lock bar open by hand, or with a flathead screwdriver if the bar is stuck or hard to access. See
Figure 8
.
(Make sure the lock bar is completely open or the cables will not release.)
Caution
Be careful not to bend the cables.
Step 3
Carefully pull the cable out of the hole.
Figure 8
Sliding Open the Lock Bar
US0
US1
US2
US3
US4
US5
US6
US7
US8
US9
155819
Red line
Shroud
1/4 in. flathead
screwdriver
155820
