vii
CAUTION:
Never place your hand inside an empty card or module bay. You should never have cause
to place a hand anywhere inside the Topspin chassis. Unused card and module bays should always have
a Topspin cover over the bay to ensure proper safety, ventilation, and cooling.
General Cautions
CAUTION:
No user is authorized to remove the Topspin system enclosure cover. The internal chassis
contains no user-serviceable components. Removing the enclosure cover voids your warranty. See the
warranty card for further details regarding the servicing of your chassis.
CAUTION:
Opening and/or modifying expansion and system modules may void your warranty. Refer
to your warranty to determine access restrictions.
In general:
•
Do not spill food or liquids on your system components.
•
Protect your Topspin system from sudden power-surges and interruptions by using a surge
suppressor, line conditioner, or uninterruptable power supply (UPS).
•
Place cables appropriately so that they do not obstruct any egress within the data center and they do
not block any ventilation inlets or outlets.
•
Rack mount the Topspin chassis according to the rack manufacturer recommendations.
Laser Cautions
CAUTION:
Only qualified service technicians should repair laser devices.
CAUTION:
Only open, modify, or service laser devices as specified in the manufacturer
documentation.
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
CAUTION:
In order to ensure eye safety, only the fiber-optic transceivers indicated in the following
table may be used.
Summary of Contents for TOPSPIN SFS 3001
Page 30: ......
