D15327.01 MX800 Dual Replacement Guide, MAY 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
31
Cisco TelePresence MX800 Dual
Replacement Guide
Replace monitor (mounted on a stand)
(page 2 of 7)
Step 4: Remove all cables
From codec connector panel
Power
From codec, loudspeakers
and left monitor
From PoE injector
From codec, camera,
loudspeakers and right monitor
All cables that were shipped with the system
remain in your property and should not be
returned to the supplier.
You will not receive new cables with the
replacement part.
Only remove cables for the monitor that you
are replacing.
For reconnecting the cables, refer to cabling details
in the
Cable schema
and
Spare part list
on our web
site. Go to
http://www.cisco.com/go/mx-docs
and
select
Maintain and Operate Guides
.
