manualshive.com logo in svg

Cisco TelePresence 3000, Installing And Removing

The Cisco TelePresence 3000 is an advanced video conferencing system that revolutionizes virtual meetings. This compact yet powerful device offers exceptional video and audio quality, effortlessly immersing participants in the virtual collaboration experience. Our website provides free downloads of user manuals, helping users easily navigate the process of installing and removing this cutting-edge product. Discover all the features and benefits of the Cisco TelePresence 3000 by downloading the manual from manualshive.com.

Share
Download
background image

 

39

OL-23393-01

Assembling the Right Frame

The right screen is assembled with the same procedure as the left screen using the right sub-assembly, 
right center sub-assembly, and right angle support.

To assemble the right screen, complete the procedures that are described in the following sections:

•

Attaching the Speakers to the Speaker Brackets, page 24

•

Assembling the Kick Guards, page 26

•

Assembling the Left Frame, page 27

•

Attaching the Fabric Sub-Assembly, page 31

•

Attaching the Feet Bracket and Leveling Feet to the Frame, page 33

•

Attaching the Speakers to the Frame, page 36

Attaching the End Caps

This section includes the steps you complete to attach the end caps to the screen and includes the 
following topics:

•

Required Parts and Tools, page 39

•

Attaching the End Caps to the Frame, page 40

Required Parts and Tools

•

1 left frame

•

1 right frame

•

1 left end unit cap

•

1 right end unit cap

Summary of Contents for TelePresence 3000



























































Reviews:

No comments

Related manuals for TelePresence 3000

CAME G5000 Installation, Operation And Maintenance Manual preview
G5000
Brand: CAME Pages: 32
Samsung MX-FS9000 Quick Manual preview
MX-FS9000
Brand: Samsung Pages: 2
Samsung MM-DX7 Manual Del Instrucción preview
MM-DX7
Brand: Samsung Pages: 33
IBCcontrol MicroMax180 Manual preview
MicroMax180
Brand: IBCcontrol Pages: 16
Simplex F18804 Installation Instructions Operating Instructions preview
F18804
Brand: Simplex Pages: 40
Sandstrom SHFUSB10 Instruction Manual preview
SHFUSB10
Brand: Sandstrom Pages: 32
RADICAL R-C10VW1 Installation Manual preview
R-C10VW1
Brand: RADICAL Pages: 13
Allen-Bradley ProcessLogix 1757-SRM Installation Instructions Manual preview
ProcessLogix 1757-SRM
Brand: Allen-Bradley Pages: 36
Valcom VL-CONF-4 Quick Start Manual preview
VL-CONF-4
Brand: Valcom Pages: 6
ABB IEC 61850 Quick Start Manual preview
IEC 61850
Brand: ABB Pages: 4
Juna JAUX_BT-01 Installation Manual preview
JAUX_BT-01
Brand: Juna Pages: 5
J.R. Clancy SceneControl 100 Operating Instructions Manual preview
SceneControl 100
Brand: J.R. Clancy Pages: 13
VCS VideoJet 400 19" Manual preview
VideoJet 400 19"
Brand: VCS Pages: 86
Panasonic SC-PM33DB Operating Instructions Manual preview
SC-PM33DB
Brand: Panasonic Pages: 24
Panasonic SC-HC20DBEB Operating Instructions Manual preview
SC-HC20DBEB
Brand: Panasonic Pages: 16
Panasonic SG-1060L Operating Instructions Manual preview
SG-1060L
Brand: Panasonic Pages: 31
Panasonic SC-AKX600 Operating Instructions Manual preview
SC-AKX600
Brand: Panasonic Pages: 20
Panasonic SC-VK950 Operating Instructions Manual preview
SC-VK950
Brand: Panasonic Pages: 40

Brands by name

Popular brands

Load more brands