Cisco StadiumVision SV-4K Deployment Manual Download

Page: 35 / 76

Deploying the SV-4K Media Player

This module describes the workflow and tasks to deploy the SV-4K media player.

It is intended for Cisco StadiumVision Director administrators and installers.

Workflow Summary to Deploy the SV-4K Media
Player for the First Time

Table 15

provides a summary of the tasks and related information to deploy the SV-4K

media player.

IMPORTANT:

It is essential to follow the order of deployment

tasks provided in

Table 15

to be sure that the SV-4K device can

be properly provisioned.

Table 15. SV-4K Deployment Task Workflow

Deployment Task

For more information see:

Configure the Connected Stadium switch for SV-4K
operation (LLDP, IGMP).

"Connected Stadium Switch
Requirements" on page 24

For details about the configuration, see
the

Cisco Connected Stadium Design

Guide

available to qualified Cisco

StadiumVision partners on ciscoet.com.

Configure the DHCP server with Option 60 and
Option 43.

For requirements, see

"External

DHCP Server Requirements" on
page 23

For Cisco CNR configuration , see the

Cisco Connected Stadium Design Guide

available to qualified Cisco
StadiumVision partners on ciscoet.com.

Upload the firmware.

"Obtaining the SV-4K Firmware" on

page 29

"Uploading the SV-4K Firmware From
the Management Dashboard" on
page 29

27 of 68

Summary of Contents for StadiumVision SV-4K










































































Search results

Summary of Contents for StadiumVision SV-4K

Reviews:

Related manuals for StadiumVision SV-4K

Brands by name

Popular brands

Cisco StadiumVision SV-4K, Deployment Manual

Search results

Summary of Contents for StadiumVision SV-4K

Reviews:

Related manuals for StadiumVision SV-4K

Brands by name

Popular brands