Cisco SPA302D Owner'S Manual Download | Manualshive

Page: 43 / 49

background image

Configuring Network Settings:

(Unsupported)

For assistance,

please call Customer Service.

SIP Settings:

(Unsupported)

For assistance, please call Customer

Service.

Changing Your Ringtone

To change your Handset ringtone:

1.

From the Settings menu, choose Ringtones.

2.

Press the Up and Down Arrow buttons to select a ringtone. A
preview of the ringtone plays.

3.

Press Save to save the selected ringtone as the ringtone for
your Handset.

Configuring Keypad and Call Park Tones

You can configure a tone to play when keys on the Handset are
pressed or when a phone call is parked. To configure tones:

1.

From the Settings menu, choose Tones.

2.

Press the Up and Down Arrow buttons to select the tone set-
ting that you want to change. Press the Right and Left arrow
buttons to turn the tone on or off.

3.

Press Save to save your changes.

Configuring the Backlight Timeout Setting

You can configure the amount of time that the Handset display
screen remains lit before it is turned off to conserve battery
power. To configure the timeout setting:

1.

From the Settings menu, choose Backlight Settings.

2.

Press the Right and Left Arrow buttons to choose from 15, 30,
or 60 seconds.

3.

Press Save.

Configuring and Using Speed Dials

You can configure up to 9 speed dials (numbers 2 through 9 and

0) on your Handset. A speed dial number can be configured by
pressing and holding an unassigned number on the keypad, or by
using the Call Settings menu on the Handset.

Creating Speed Dials

To create a speed dial by choosing an unassigned number on the
phone keypad:

1.

Press and hold the number (2 through 9 or 0).

2.

When the message appears asking you to confirm the speed
dial entry, press the Left softkey to Confirm.

Perform one of the following actions:

Owner’s Manual

43

«
...
41
42
43
44
45
...
»

Summary of Contents for SPA302D


















































Reviews:

No comments

Related manuals for SPA302D

Brand: XBOX Pages: 13

Brand: JPL Pages: 2

Brand: HAMECO Pages: 4

Brand: AT&T Pages: 36

EPOS SC 660 USB ML

Brand: Sennheiser Pages: 2

Brand: Konix Pages: 24

Brand: NATIVE UNION Pages: 40

BLACKSHARK V2 PRO 2023

Brand: Razer Pages: 36

Brand: Acer Pages: 5

Brand: Blueant Pages: 37

Brand: FCCID Pages: 18

Brand: ACO Pages: 4

Brand: BlueWear Pages: 27

Brand: TE-Group Pages: 10

Brand: Targus Pages: 19

MT53H540F-01 GB

Brand: Peltor Pages: 36

Brand: Peltor Pages: 60

Brand: LANYA ELECTRONIC Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands