3
Release Notes for Cisco SN 5428-2 Storage Router, Release 3.5.1
OL-5241-02
Figure 3
FCIP
In addition to providing services for accessing storage over IP networks, the SN 5428-2 Storage Router
software provides the following services:
•
VLAN Access Control—provides IP access control to storage based on a VLAN identifier (VID)
number (in addition to access control through access lists)
•
Authentication—provides iSCSI, Enable and Login authentication using AAA authentication
methods
•
High Availability (HA)—provides the ability to group storage routers in a cluster for intelligent
failover and other cluster-related functions (for SCSI routing only)
•
E_Port with FC Fabric Zoning—provides the ability to connect FC ports to FC switches and
participate in fabric zoning, manage zoning, and support zone mergers
•
SNMP/MIB support—provides network management of the SN 5428-2 through SNMP using
selected MIBs
•
Gigabit Ethernet Interface features—provides the ability to assign a management IP address per
Gigabit Ethernet interface, multiple IP addresses per SCSI routing instance, and an optional
secondary Gigabit Ethernet interface per IP address used for SCSI routing or SN 5428-2
management. When the SN 5428-2 is deployed for FCIP, provides primary and optional secondary
Gigabit Ethernet interfaces to the FCIP peer.
•
FCIP data compression—enables the SN 5428-2 to dynamically compress FCIP data traffic for
better channel bandwidth utilization
•
FCIP SACK support—uses selective acknowledgement (SACK) to overcome the limitations of
recovering from multiple lost packets during a TCP transmission for FCIP instances configured as
TCP clients or servers
•
Buffer credit extension—enables the SN 5428-2 to donate buffer credits from a donor port to
selected FC ports
•
Secure Sockets Layer (SSL) support—provides HTTPS connection for secure access through the
web-based GUI
•
Secure Shell (SSH) protocol version 2 support—provides high encryption and authentication for
interactive management sessions, and is a common replacement for Telnet
•
Routing Information Protocol (RIP) listening support—allows the SN 5428-2 to learn dynamic
routing using RIP (version 1 or version 2) listening
•
Service Location Protocol (SLP) support—provides the ability to advertise targets of specified SCSI
routing instances to initiators or servers that use SLP
•
Internet Storage Name Service (iSNS) support—provides the ability to register iSCSI targets with
an iSNS server, allowing iSCSI initiators to dynamically discover available storage targets
IP
SN 5428-2
SN 5428-2
91658
FC hosts and
storage devices
FC hosts and
storage devices
SAN
SAN
The SN 5428-2s connect
SANs by tunneling though
the IP network
