10 Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
Connecting the Equipment
S
TEP
1
For Ethernet WAN connections, connect one end of the Ethernet
cable to your Internet access device (typically a modem), and
connect the other end of the cable to the WAN port.
For ADSL connections, connect your DSL cable directly to the DSL
port on your SRP526W-U or SRP527W-U. If required by your
Service Provider, make sure that you use an ADSL splitter.
SRP521W-U Ethernet WAN Connections
SRP526W-U / SRP527W-U ADSL Connections
S
TEP
2
Connect wired computers and other network devices to the LAN
ports (1–4).
S
TEP
3
(Optional) Connect an analog telephone, fax machine, or similar
device to the Phone (FXS) ports. Then connect the Line (FXO) ports
to the telephone line wall socket port(s).
S
TEP
4
Connect the plug adaptor provided for your region to the power
supply. Only use the power adapter that was provided with the
unit.
S
TEP
5
Connect the power adapter to the 12V DC port on your SRP.
4
195790
12VDC
LAN (10/100)
WAN (10/100)
2
1
1
2
3
4
LINE (FXO)
PHONE (FXS)
WAN (10/100) Port
199989
LAN (10/100)
LAN/WAN
2
1
1
2
3
4
LINE (FXO)
DSL
PHONE (FXS)
DSL Port
