Cisco Small Business Pro SPA 504G User Manual Download Page 82

Page: 82 / 95

Using the Web Interface

Changing the LCD Contrast

Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)

Changing the LCD Contrast

NOTE

Not applicable to the Cisco SPA 501G.

STEP 1

STEP 2

In the Voice tab, click the User tab.

STEP 3

Under Audio Volume, you can adjust the LCD contrast by entering a number
between 1 and 10, with 1 being low contrast.

STEP 4

Click Submit All Changes.

Configuring the Phone Screen Saver

NOTE

Not applicable to the Cisco SPA 501G.

To configure the phone screen saver:

STEP 1

STEP 2

In the Voice tab, click the Phone tab.

Under General, you can configure the following:

•

Screen Saver Enable: Turns the screen saver on and off.

•

Screen Saver Wait: The number of seconds that the phone is idle before the
screen saver starts.

•

Screen Saver Icon: The display type:

A background picture.

The station time in the middle of the screen.

Summary of Contents for Small Business Pro SPA 504G
































































































Search results

Summary of Contents for Small Business Pro SPA 504G

Reviews:

Related manuals for Small Business Pro SPA 504G

Brands by name

Popular brands

Cisco Small Business Pro SPA 504G, User Manual

Search results

Summary of Contents for Small Business Pro SPA 504G

Reviews:

Related manuals for Small Business Pro SPA 504G

Brands by name

Popular brands