Cisco SF550X-24, Administration Manual

Page: 280 / 725

VLAN Management
VLAN Groups
219 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
11
To assign a MAC address to a VLAN Group:
STEP 1
Click VLAN Management > VLAN Groups > MAC-Based Groups .
STEP 2
Click Add.
STEP 3
Enter the values for the following fields:
• MAC Address —Enter a MAC address to be assigned to a VLAN group.
NOTE
This MAC address cannot be assigned to any other VLAN group.
• Prefix Mask —Enter one of the following:
- Host —Source host of the MAC address
- Length — Prefix of the MAC address
• Group ID —Enter a user-created VLAN group ID number.
STEP 4
Click Apply . The MAC address is assigned to a VLAN group.
MAC-Based Groups to VLAN
See Table 1 for a description of the availability of this feature.
Ports/LAGs must be in General mode.
To assign a MAC-based VLAN group to a VLAN on an interface:
STEP 1
Click VLAN Management > VLAN Groups > MAC-Based Groups to VLAN.
STEP 2
Click Add.
STEP 3
Enter the values for the following fields:
• Group Type —Displays that the group is MAC-Based.
• Interface —Enter a general interface (port/LAG) through which traffic is received.
• Group ID —Select a VLAN group, defined in the MAC-based VLAN Group Overview
page .
• VLAN ID —Select the VLAN to which traffic from the VLAN group is forwarded.