manualshive.com logo in svg

Cisco SF220-24, Administration Manual

The Cisco SF220-24 is a feature-rich network switch that empowers your business with reliable connectivity. Setting it up is a breeze with the included Quick Start Manual. You can easily download the user manual from our website, manualshive.com, for free. Unlock the full potential of your network with this robust and user-friendly device.

Share
Download
background image

7

Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x

75

Administration: Diagnostics

This chapter contains information for configuring port mirroring, running cable 
tests, and viewing optical module status and CPU utilization. 

It includes the following topics:

•

Testing Copper Ports

•

Viewing Optical Module Status

•

Configuring Port and VLAN Mirroring

•

Viewing CPU Utilization

Testing Copper Ports

Use the Copper Test page to perform the integrated cable tests on copper cables. 

!

CAUTION

When a port is tested, it is set to the Down state and communications are 
interrupted. After the test, the port returns to the Up state. We do not recommend 
that you run the test on a port that you are using to run the web-based interface, 
because communications with that device are disrupted. 

To test copper cables attached to ports:

STEP 1

Click 

Administration

 > 

Diagnostics

 > 

Copper Test

. 

STEP  2

Select a port on which to run the copper test. 

STEP  3

Click 

Copper Test

.

The following fields for the test are displayed:

•

Test Results

—Summary of the test results. 

Summary of Contents for SF220-24


































































































































































































































































































Reviews:

No comments

Related manuals for SF220-24

Campbell SDS-122 Instruction Manual preview
SDS-122
Brand: Campbell Pages: 14
Brightlink 16x16 Manual preview
16x16
Brand: Brightlink Pages: 33
Vector MZ3-V01 Quick Start Manual preview
MZ3-V01
Brand: Vector Pages: 3
Adler ASM512 Installation, Maintenance And Operating Manual Instruction preview
ASM512
Brand: Adler Pages: 8
Dell EMC PowerSwitch Z9332F-ON Setup Manual preview
PowerSwitch Z9332F-ON
Brand: Dell EMC Pages: 16
Enterasys RoamAbout RBT-4102-BG Installation Manual preview
RoamAbout RBT-4102-BG
Brand: Enterasys Pages: 72
Hirschmann PAT TRS 05 / PATB3 Installation And Setup Manual preview
PAT TRS 05 / PATB3
Brand: Hirschmann Pages: 12
Radial Engineering Cherry Picker User Manual preview
Cherry Picker
Brand: Radial Engineering Pages: 8
Dahua PFS4226-24ET-240 User Manual preview
PFS4226-24ET-240
Brand: Dahua Pages: 3
DeLOCK 11481 User Manual preview
11481
Brand: DeLOCK Pages: 26
BENDIX SL-3-SL-4 STOP LIGHT SWITCH Manual preview
SL-3-SL-4 STOP LIGHT SWITCH
Brand: BENDIX Pages: 4
Eaton Cutler-Hammer RTHMFDA20100WSU Instructions Manual preview
Cutler-Hammer RTHMFDA20100WSU
Brand: Eaton Pages: 28
WilTec SKD-1 Operation Manual preview
SKD-1
Brand: WilTec Pages: 7
I-Tech AVS801 User Manual preview
AVS801
Brand: I-Tech Pages: 22
3onedata TNS5000D Series Quick Installation Manual preview
TNS5000D Series
Brand: 3onedata Pages: 3
LINK-MI LM-AD01 User Manual preview
LM-AD01
Brand: LINK-MI Pages: 9
I-Rocks IR-4650 Quick Installation Manual preview
IR-4650
Brand: I-Rocks Pages: 18
IOGear GUD3C8K2P Quick Start Manual preview
GUD3C8K2P
Brand: IOGear Pages: 10

Brands by name

Popular brands

Load more brands