Cisco SE680 WiMAX, User Manual

Page: 16 / 67

16
User interface
SE680 WiMAX / engbt / SE680_FUG_EN-7 / Basic_configuration.fm / 13.5.11
Schablo
ne 2005_05_
02
If the login screen does not open:

Check the connections; see "Connecting the SE680 WiMAX modem" on page 12.

If you use a firewall on the PC, it must allow connection to the SE680 WiMAX. If
applicable, switch off the firewall for a test; if you can then open the login screen,
configure the firewall accordingly. For details, refer to the user guide for your fire-
wall.
If you have changed the standard settings on your PC, you might not be able to open
the configuration pages.

For details on how to find and rectify the fault, see "Troubleshooting" on page 40.
Saving the user interface address

You can add the address of the registration page to your favourites/bookmarks so
that you will no longer need to enter the IP address manually in future:
– Internet Explorer:
Add to Favorites button
– Firefox: Bookmarks > Add Bookmark
User interface elements
The user interface you open with the Web browser is divided into the following sections:
Tab selection:
Open the Home , Basic Setup Wizard , Advanced Settings or Status tabs to
display the contents of each configuration area.
Language button:
Select your language. This button is only available on the Home screen.
Logout button:
The button is only displayed if a system password is set up.
Log off from your SE680 WiMAX modem.
Home
Language Logout
Operating Mode
Internet
...
...
...
Advanced Settings
Basic Setup Wizard Status
1 2 3
4
5
6
1
2
3