Power supply:
• Off—No AC input (12-V main power off;
12-V standby power off)
• Green, flashing—12-V main power off; 12-V
standby power on.
• Green—12-V main power on; 12-V standby
power on.
• Amber, flashing—Warning threshold
detected but 12-V main power on.
• Amber—Critical error detected; 12-V main
power off ( for example, overcurrent,
overvoltage, or overtemperature failure).
6
Rear unit identification:
• Off—The unit identification function is not
in use.
• Blue, flashing—The unit identification
function is activated.
5
Power Supply
Make sure that one power supply is always active.
Note
The following table lists the specifications for the 770-W AC power supply (Cisco part number 341-0591-04)
used in the WSA S195 and S395.
Table 2: 770-W Power Supply Specifications
Specification
Description
Nominal range: 100 to 120 V AC, 200 to 240 V AC
Range: 90–132 V AC, 180–264 V AC
AC input voltage range
Nominal range: 50–60 Hz
Range: 47–63 Hz
AC input frequency
9.5 A peak at 100-V AC
4.5 A peak at 208 V AC
Maximum AC input current
950 VA at 100 V AC
Maximum input volt amperes
770 W
Maximum output power for each power supply
15 A (subcycle duration)
Maximum inrush current
12 ms at 770 W
Maximum hold-up time
12 V DC
Power supply output voltage
12 V DC
Power supply standby voltage
Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide
16
Overview
Power Supply