12
8
Connect to the Appliance
Plug the Ethernet cables into the appropriate ports on the back
panel of the Cisco S170 appliance.
•
The proxy ports are labeled P1 and P2.
–
P1 only enabled: When only P1 is enabled, connect it to
the network for both incoming and outgoing traffic.
–
P1 and P2 enabled: When both P1 and P2 are enabled,
you must connect P1 to the internal network and P2 to
the Internet.
•
The traffic monitor ports are labeled T1 and T2.
–
Simplex tap: Ports T1 and T2; one cable for all packets
destined for the Internet (T1) and one cable for all
packets coming from the Internet (T2).
–
Duplex tap: Port T1; one cable for all incoming and
outgoing traffic.
T1
T2
P2
P1
MGMT
CONSOLE
303415
Management PC
L4 Switch/
WCCP Router
Ethernet TAP
Simplex/Duplex
S170_QSG.fm Page 12 Wednesday, March 13, 2013 10:23 PM
Summary of Contents for S170
Page 23: ......
