Quality of Service (QoS)
Configuring QoS Port-Based Settings
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
119
7
Configuring QoS Port-Based Settings
You can configure QoS settings for every port on your device. It supports four
priority queues that allow traffic prioritization for each port.
To configure QoS settings for the ports on your device:
STEP 1
Select
QoS
>
QoS Port-Based Settings
.
STEP 2
For each port in the
QoS Port-Based Settings
table, enter this information:
STEP 3
Click
Save
.
To restore the default port-based QoS settings, click
Restore Default
and save
your changes.
Trust Mode
Select one of the following options from the drop-
down menu:
•
Port
—Enables port-based QoS settings.
You can then set the traffic priority for a
particular port. The traffic queue priority
starts at the lowest priority of 1 and ends
with the highest priority of 4.
•
DSCP
—Differentiated Services Code Point
(DSCP). Enabling this feature prioritizes the
network traffic based on the DSCP queue
mapping on the
DSCP Settings
page.
•
CoS
—Class of service (CoS). Enabling this
feature prioritizes the network traffic based
on the CoS queue mapping on the
CoS
Settings
page.
Default Traffic
Forwarding Queue for
Untrusted Devices
Select a priority level for outbound traffic (1 to 4).
