Cisco Quick Set C20 Reference Manual Download Page 20

Page: 20 / 195

D14869.11

Codec C20 API Reference Guide TC7.0, JANUARY 2014.

Cisco TelePresence System Codec C20

API Reference Guide

Feedback from codec over HTTP

To get notifications from the codec, you need to register

HTTP feedback expressions. The codec will then use HTTP

POST to send feedback messages to the supplied IP-

address. This means that you have to have a HTTP server

running for your application to receive updates from the

codec.

Registering for feedback

The command for registering is

xCommand HttpFeedback Register

. The syntax for this

command and its arguments are described in this section.

HttpFeedback Register syntax:

xCommand HttpFeedback Register

FeedbackSlot: <1..4>

ServerUrl(r): <S: 1, 2048>

Expression: <S: 1, 255>

HttpFeedback Register arguments:
FeedbackSlot:

The codec can register up to 4 slots of

servers requesting HTTP feedback. Set the registering to one

of them.

Note:

Avoid using FeedbackSlot 3 in an environment where

Cisco TelePresence Management Suite (TMS) is used as

TMS uses this feedbackslot to register its expressions.

ServerUrl:

The URL that you want the codec to post the

HTTP feedback messages to.

Expression 1-15:

receive feedback on. See the



"Feedback mechanism" on

page 17

section for more information about the expression

formats.

Example:

Registering feedback on configuration changes,

disconnect events and call status changes.

<ServerUrl>http://127.0.0.1/

myhttppostscripturl</ServerUrl>

<Expression item=”1”>/Configuration</

Expression>

<Expression item=”2”>/Event/

CallDisconnect</Expression>

<Expression item=”3”>/Status/Call</

Expression>

</Register>

</HttpFeedback>

</Command>

Feedback output

When the codec notifies the registered HTTP server about

changes, the body contains the same XML as when polling.

There is however one small difference. The root-node

contains an

Identification

node with children that specify the

codec from which the notification originated. This means that

you can handle multiple codecs with a single HTTP server

URI.

Example:

Audio volume changed.

<Configuration xmlns=”http://www.company.com/XML/

CUIL/2.0”>

<SystemName>integrator</SystemName>

<ProductType>Cisco Codec</ProductType>

<ProductID>Cisco Codec C20</ProductID>

</Identification>

</Audio>

</Configuration>

Contents

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

About the API

Summary of Contents for Quick Set C20




































































































































































































Search results

Summary of Contents for Quick Set C20

Reviews:

Related manuals for Quick Set C20

Brands by name

Popular brands

Cisco Quick Set C20, Reference Manual

Search results

Summary of Contents for Quick Set C20

Reviews:

Related manuals for Quick Set C20

Brands by name

Popular brands