3-5
Cisco Physical Access 1125 Appliance User Guide
OL-20929-01
Chapter 3 Rack Mounting the Cisco PAM 1125 Appliance
Rack Mounting the Cisco PAM 1125 Appliance
Figure 3-3
Removing a Handle from the Chassis
211432
Step 2
Place a mounting bracket (see item 1 in
) along one side of the chassis in the
mid-mount position.
Step 3
Align the holes (item 2 in
) in the bracket with the tabs (item 3 in
) on the chassis and place the bracket against the chassis.
Step 4
Slide the bracket as far as it will go toward the front of the chassis.
Step 5
Fasten the bracket to the chassis using the hex head screws (item 4 in
).
Step 6
In the same manner, attach a bracket to the other side of the chassis.
