4-7
PA-2FEISL 100BASE-T Fast Ethernet/ISL Port Adapter Installation and Configuration
OL-3475-02
Chapter 4 Configuring the PA-2FEISL
Checking the Configuration
Note
The ouputs that appear in this document may not match the output you receive when running these
commands. The outputs in this document are examples only.
Cisco 7100 Series Routers
Use the
show version
(or
show hardware
) command to display the configuration of the system
hardware (the number of each port adapter type installed), the software version, the names and sources
of configuration files, and the boot images. The following is an example of the
show version
command
from a Cisco 7120 series router with the PA-2FEISL:
Router #
show version
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JS-M), Version 12.0(5)T
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 30-Jun-99 13:56 by userid
Image text-base:0x60008900, data-base:0x6136A000
ROM:System Bootstrap, Version 11.1(13)CA, RELEASE SOFTWARE (f)
Router uptime is 27 minutes
System restarted by reload
System image file is "slot0:c7200-js-m.960421", booted via slot0
cisco 7206 (NPE200) processor with 57344K/8192K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
6 slot midplane, Version 1.3
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
4 Ethernet/IEEE 802.3 interface(s)
2 FastEthernet/IEEE 802.3 interface(s)
4 Token Ring/IEEE 802.5 interface(s)
125K bytes of non-volatile configuration memory.
4096K bytes of packet SRAM memory.
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2100
Cisco 7200 Series and Cisco uBR7200 Series Routers
Use the
show version
(or
show hardware
) command to display the configuration of the system
hardware (the number of each port adapter type installed), the software version, the names and sources
of configuration files, and the boot images. The following is an example of the
show version
command
from a Cisco 7200 series router with the PA-2FEISL:
Router #
show version
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JS-M), Version 12.0(5)T
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 30-Jun-99 13:56 by userid
Image text-base:0x60008900, data-base:0x6136A000
ROM:System Bootstrap, Version 11.1(13)CA, RELEASE SOFTWARE (f)
Router uptime is 27 minutes
System restarted by reload
