Cisco ONS 15600 Series, Reference Manual, Page: 93 / 340

4-9
Cisco ONS 15600 Reference Manual, R7.0
Chapter 4 Cisco Transport Controller Operation
4.5.1 Node View
Figure 4-3 Terminal Loopback Indicator
Figure 4-4 Facility Loopback Indicator
4.5.1.2 Node View Card Shortcuts
If you move your mouse over cards in the graphic, popups display additional information about the card
including the card type; card status (active or standby); the type of alarm, such as critical, major, and
minor (if any); and the alarm profile used by the card. Right-click a card to reveal a shortcut menu that
you can use to open, reset, or delete a card. Right-click a slot to preprovision a card (that is, provision a
slot before installing the card).
4.5.1.3 Node View Tabs
Table 4-4 lists the tabs and subtabs available in the node view.
Table 4-4 Node View Tabs and Subtabs
Tab Description Subtabs
Alarms Lists current alarms (CR, MJ, MN) for the
node and updates them in real time. —
Conditions Allows you to retrieve a list of standing
conditions on the node. —
History Provides a history of node alarms including
date, type, and severity of each alarm. The
Session subtab displays alarms and events for
the current session. The Node subtab displays
alarms and events retrieved from a fixed-size
log on the node. Session, Node
Circuits Allows you to create, delete, edit, and reroute
circuits. Circuits, Rolls
Provisioning Allows you to provision the ONS 15600 node. General, Network, OSI, BLSR,
Protection, Security, SNMP, Comm
Channels, Timing, Alarm Profiles,
Alarm Extenders, Defaults