
12-11
Cisco ONS 15600 Reference Manual, R7.0
Chapter 12 Performance Monitoring
12.5.2 Physical Layer Parameters
12.5.2 Physical Layer Parameters
The ONS 15600 retrieves the OPR, OPT, and LBC from the line card and stores these values with the
PM counts for the 15-minute and 1-day periods. You can retrieve current OPR, OPT, and LBC values for
each port by displaying the card view in CTC and clicking the Maintenance > Transceiver tabs.
The physical layer performance parameters consist of normalized and non-normalized values of LBC,
OPT, and OPR.
defines the non-normalized values.
12.6 ASAP Card Performance Monitoring
The following sections define performance monitoring parameters for the Any Service Any Port (ASAP)
card.
12.6.1 ASAP Card Optical Performance Monitoring Parameters
lists the near-end and far-end section layer PMs.
Table 12-4
Non-Normalized Transceiver Physical Optics for the OC-48/STM16 and
OC-192/STM64 Cards
Parameter
Definition
Non-normalized LBC (mA)
1
1.
This value should be somewhat consistent from port to port and cannot be configured.
The actual operating value of laser bias current (mA) for the specified
card port.
Non-normalized OPR (dbm)
2
2.
This value will vary from port to port because of received optical signal power differences. This value can be configured by
calibrating the nominal value to the initial receive power level when the port is put in service.
The actual operating value of optical power received (dBm) for the
specified card port.
Non-normalized OPT (dbm)
The actual operating value of optical power transmitted (dBm) for the
specified card port.
Table 12-5
ASAP Card PMs
Section (NE)
Line (NE)
STS Path (NE)
1
,
2
1.
SONET path performance monitoring parameters increment only if IPPM is enabled. For additional information, see the
Performance Monitoring” section on page 12-2
.
To monitor SONET path performance monitoring parameters, log into the far-end node directly.
Line (FE)
Optics (NE)
3
,
4
STS Path (FE)
CV-S
ES-S
SES-S
SEF-S
CV-L
ES-L
SES-L
UAS-L
FC-L
PSC (1+1)
PSC (BLSR)
PSD (1+1)
PSD (BLSR)
PSC-W
PSD-W
CV-P
ES-P
SES-P
UAS-P
FC-P
PPJC-PDET
NPJC-PDET
PPJC-PGEN
NPJC-PGEN
CV-L
ES-L
SES-L
UAS-L
FC-L
OPT
OPR
LBC
5
CV-P
ES-P
SES-P
UAS-P
FC-P
Summary of Contents for ONS 15600 Series
