Cisco ONS 15327, User Documentation

Page: 329 / 559

10-3
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 10 Alarm Monitoring and Management
Viewing ONS 15327 Alarms
10.2.1 Controlling Alarm Display
You can control the display of the alarms on the Alarms tab. Table 10-3 shows the actions you can
perform from the Alarms tab.
10.2.2 Viewing Alarm-Affected Circuits
User can view which ONS 15327 circuits are affected by a specific alarm. To do this, highlight an alarm
and right-click it. The
Selected Affected Circuits shortcut menu appears. Figure 10-2 illustrates the
Select Affected Circuits option. When the option is clicked, the affected circuits are shown as in
Figure 10-3 .
Table 10-2 Color Codes for Alarms, Conditions, and Events
Color Description
Red Critical Alarm (CR)
Orange Major Alarm (MJ)
Yellow Minor Alarm (MN)
Magenta Event (NA)
Blue Condition (NR)
White Cleared alarm or event (CL)
Table 10-3 Alarm Display
Button Action
Synchronize Alarms Updates the alarm display; although CTC displays alarms in real time, the
Synchronize Alarms button allows you to verify the alarm display. This is
particularly useful during provisioning or troubleshooting.
Delete Cleared Alarms Deletes alarms that have been cleared.
AutoDelete Cleared
Alarms If checked, CTC automatically deletes cleared alarms.
Show Events (NA) If checked, CTC shows alarms and NA events or conditions. Not-alarmed
events do not require action and normally are displayed only under the
Conditions tab.