Cisco ONS 15327, User Documentation

Page: 132 / 559

3-6
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 3 Node Setup
Creating Users and Setting Security
Each ONS 15327 user has a specified amount of time that he or she can leave the system idle before the
CTC window is locked. The lockouts prevent unauthorized users from making changes. Higher-level
users have shorter idle times, as shown in
Table 3-2 .
You can perform ONS 15327 user management tasks from network or node view. In network view, you
can add, edit, or delete users from multiple nodes at one time. If you perform user management tasks in
node view, you can only add, edit, or delete users from that node.
Note
You must add the same user name and password to each node the user will access.
Procedure: Create New Users
Step 1 In network view, select the Provisioning > Security tabs.
Step 2
On the Security pane, click Create .
Step 3 In the Create User dialog box, enter the following:
•
Name —Type the user name.
•
Password —Type the user password. The password must be a minimum of six and a maximum of ten
alphabetic (a-z, A-Z), numeric, (0-9) and special characters (+, #,%), where at least one character is
alphabetic, one is numeric, and one is a special character.
•
Confirm Password —Type the password again to confirm it.
• Security Level —Select the user’s security level.
Step 4
Under “Select applicable nodes,” deselect any nodes where you do not want to add the user (all network
nodes are selected by default).
Step 5 Click OK .
Diagnostic Retrieve/Lamp test X X X
Timing Edit X X X
Audit Retrieve X X X X
Routing Table Read only
Test Access Read only
Table 3-1 ONS 15327Security Levels—Node View (continued)
CTC Tab Subtab Actions Retrieve Maintenance Provisioning Superuser
Table 3-2 ONS 15327 User Idle Times
Security Level Idle Time
Superuser 15 minutes
Provisioning 30 minutes
Maintenance 60 minutes
Retrieve Unlimited