© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 25 of 41
Cisco Nexus B22HP loading after the parent switch is configured
N5548-Bottom(config-if)# show fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
103 FEX0103 Connected N2K-B22HP-P FOC1515ZZU4
N5548-Bottom(config-if)#
Cisco Nexus B22HP online and ready for use
N5548-Top# show fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
104 FEX0104 Online N2K-B22HP-P FOC1515ZZUU
N5548-Top#
N5548-Top#
show fex detail
Displays the details of the fabric extender module, including the IOM bay number, rack name, and enclosure
information of the HP BladeSystem c-Class chassis
N5548-Top# show fex detail
FEX: 104 Description: FEX0104 state: Online
FEX version: 5.0(3)N2(2) [Switch version: 5.0(3)N2(2)]
FEX Interim version: 5.0(3)N2(2)
Switch Interim version: 5.0(3)N2(2)
Extender Model: N2K-B22HP-P, Extender Serial: FOC151425GA
Part No: 73-13780-05
Bay: 4
Rack: UnnamedRack
Enclosure: 1Z34AB789012
Enclosure Serial: USE6401VEX
Rack Id: Default RUID
Card Id: 145, Mac Addr: e8:b7:48:4b:cd:42, Num Macs: 262208
Module Sw Gen: 12594 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/1
Fabric interface state:
Po4 - Interface Up. State: Active
Eth1/1 - Interface Up. State: Active
