Verifying the CoPP Configuration
To display CoPP configuration information, perform one of the following tasks:
Purpose
Command
Displays the control plane policy
map with associated class maps and
CIR and BC values.
show policy-map type control-plane
[
expand
] [
name
policy-map-name
]
Displays the policy values with
associated class maps and drops per
policy or class map. It also displays
the scale factor values when a
CoPP policy is applied. When the
scale factor value is the default
(1.00), it is not displayed.
The scale factor changes
the CIR and BC values
internally on each
module, but the display
shows the configured
CIR and BC values
only. The actual applied
value on a module is the
scale factor multiplied
by the configured value.
Note
show policy-map interface control-plane
Displays the control plane class
map configuration, including the
ACLs that are bound to this class
map.
show class-map type control-plane
[
class-map-name
]
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
486
Configuring Control Plane Policing
Verifying the CoPP Configuration