S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
E-31
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
Repacking the System Components
Figure E-19
Packing the System Components
Step 26
Place the power supply box in the non raised area beside the chassis as shown in View A in
Step 27
Place the three-segment divider in the non-raised area above the power supply box as shown in View A
in
Step 28
Remove each of the two bottom-support rails from the rack or cabinet by loosening the eight screws that
secure each of them to the vertical mounting rails on the rack or cabinet.
Step 29
Reassemble the accessory kit by placing the following components in the accessory kit box:
•
Bottom-support rails (two) and mounting screws (34)
•
Console connector cables and adapters
1
Power supply box.
6
Insert accessory kit, cable management frame kit, and the optional
front door and air intake frame kit.
2
Polyethylene cushion.
7
Corrugated cardboard lid.
3
Three-segment divider.
8
Edge protectors.
4
Two J-box halves.
9
Packing straps.
5
Corro clips.
