Cisco Nexus 7000 Series, Command Reference Manual

Page: 557 / 1018

periodic
To specify a time range that is active one or more times per week, use the periodic command. To remove a
periodic time range, use the no form of this command.
[ sequence-number ] periodic weekday time to [ weekday ] time
no
{ sequence-number |
periodic weekday time to
[ weekday ] time }
[ sequence-number ] periodic list-of-weekdays time to time
no { sequence-number | periodic list-of-weekdays time to time }
Syntax Description
(Optional) Sequence number of the rule, which causes
the device to insert the command in that numbered
position in the time range. Sequence numbers
maintain the order of rules within a time range.
A sequence number can be any integer between 1 and
4294967295.
By default, the first rule in a time range has a
sequence number of 10.
If you do not specify a sequence number, the device
adds the rule to the end of the time range and assigns
a sequence number that is 10 greater than the
sequence number of the preceding rule.
Use the resequence command to reassign sequence
numbers to rules.
sequence-number
Day of the week that the range begins or ends. The
first occurrence of this argument is the day that the
range starts. The second occurrence is the day that
the range ends. If the second occurrence is omitted,
the end of the range is on the same day as the start of
the range.
The following keywords are valid values for the
weekday argument:
•
monday
•
tuesday
• wednesday
• thursday
• friday
• saturday
• sunday
weekday
Cisco Nexus 7000 Series Security Command Reference
531
P Commands
periodic