S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-118
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
mode tap-aggregation
mode tap-aggregation
To allow the attachment of an ACL with a Tap Aggregation policy to an interface, use the
mode
tap-aggregation
command. To disallow the attachment of such a policy to an interface, use the
no
form
of this command.
mode tap-aggregation
no mode tap-aggregation
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Interface configuration mode
Command History
Usage Guidelines
You can use this command on all Cisco Nexus 3000 Series and Cisco Nexus 3100 Series switches.
To be able to apply an ACL with a Tap Aggregation policy on an interface, you must run the
mode
tap-aggregation
command.
Examples
This example shows how to enable mode tap-aggregation and apply the ACL on an interface:
switch#
configure terminal
switch(config)#
interface ethernet1/2
switch(config-if)#
mode tap-aggregation
switch(config-if)#
ip port access-group test in
Related Commands
Release
Modification
6.0(2)U2(3)
This command was introduced.
Command
Description
ip port access-group
Applies an ACL to an interface.