Cisco N9K-C93360YC-FX2 Hardware Installation Manual Download Page 9

Page: 9 / 72

C H A P T E R

Overview

•

Overview

The Cisco Nexus 93360YC-FX2 switch (N9K-C93360YC-FX2) is a 2-rack unit (RU), fixed-port switch
designed for deployment in data centers. This switch has the following ports:

• 96 10-/25-Gigabit SFP28 ports

• 12 40/100-Gigabit QSFP28 ports

• Two management ports (one RJ-45 port and one SFP port)

• One console port

• 1 USB port

This switch includes the following user-replaceable components:

• Fan modules (three) with the following airflow choices:

• Port-side exhaust fan module with blue coloring (NXA-FAN-160CFM-PE)

• Port-side intake fan module with burgundy coloring (NXA-FAN-160CFM-PI)

• Power supply modules (two—One for operations and one for redundancy [1+1]) with the following

choices:

• 1200-W port-side exhaust AC power supply with blue coloring (NXA-PAC-1200W-PE)

• 1200-W port-side intake AC power supply with burgundy coloring (NXA-PAC-1200W-PI)

• 1200-W HVAC/HVDC dual-direction airflow power supply with white coloring (N9K-PUV-1200W)

• 930-W port-side exhaust DC power supply with blue coloring (NXA-PDC-930W-PE)

• 930-W port-side intake DC power supply with burgundy coloring (NXA-PDC-930W-PI)

Cisco Nexus 93360YC-FX2 NX-OS Mode Switch Hardware Installation Guide

Summary of Contents for N9K-C93360YC-FX2









































































Search results

Summary of Contents for N9K-C93360YC-FX2

Reviews:

Related manuals for N9K-C93360YC-FX2

Brands by name

Popular brands

Cisco N9K-C93360YC-FX2, Hardware Installation Manual

Search results

Summary of Contents for N9K-C93360YC-FX2

Reviews:

Related manuals for N9K-C93360YC-FX2

Brands by name

Popular brands