Cisco MSE 3365, Installation Manual

Page: 6 / 10

1-6
Cisco MSE 3365 Installation Guide
Chapter 1 Overview
Status LEDs and Buttons
Rear Panel LEDs and Buttons
Figure 1-4 shows the rear panel LEDs and buttons. Table 1-2 defines the LED states.
Figure 1-4 Rear Panel LEDs and Buttons
1
Optional mLOM card LEDs.
Note
This LED is not applicable for Cisco
MSE 3365.
5
1-Gb Ethernet link status LED
2
1-Gb Ethernet dedicated management link
status LED
6
Rear unit identification button/LED
3
1-Gb Ethernet dedicated management link
speed LED
7
Power supply status LED
4 1-Gb Ethernet link speed LED
Table 1-2 Rear Panel LEDs, Definitions of States
LED Name State
2
1-Gb Ethernet dedicated
management link speed • Off—Link speed is 10 Mbps.
• Amber—Link speed is 100 Mbps.
•
Green—Link speed is 1 Gbps.
3
1-Gb Ethernet dedicated
management link status • Off—No link is present.
•
Green—Link is active.
• Green, blinking—Traffic is present on the active link.
4
1-Gb Ethernet link speed • Off—Link speed is 10 Mbps.
•
Amber—Link speed is 100 Mbps.
• Green—Link speed is 1 Gbps.
5 1-Gb Ethernet link status
•
Off—No link is present.
• Green—Link is active.
•
Green, blinking—Traffic is present on the active link.
353089
mLOM
PCIe 01 PCIe 02
PSU 01 PSU 02
1 3 2 5 6 7 4
1 2