3-84
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 3 Provisioning PXM1E Communication Links
General PXM1E Configuration Procedures
Displaying a List of Connections
To display a list of connections on the current PXM1E card, enter the dspcons command as follows:
PXM1E_SJ.8.PXM.a >
dspcons
[-port
portid
] [-vpi
starting-vpi
] [-vci
starting-vci
] [-state
{fail|ok|down}] [-owner {master|slave}] [-sc {cbr | rtvbr | nrtvbr | abr | ubr}]
[-persflag {nonpersistent | persistent}] [-rteid <
pref-rte-id
> ] [-type {p2p | p2mp}]
[-smconinfo {notavail | avail}]
You can enter the dspcons command without parameters, or you can include any of the parameters list
in
Table 3-19 Optional Parameters for the dspcons Command
Parameter
Description
portid
Limits the list of connections to all connections on the specified port. Specify the
port in the format [shelf.]slot[:subslot].port[:subport]. To display a list of the
available ports, enter the dspcons command without any options.
starting-vpi
Limits the list of connections to all connections with a VPI equal to or greater
than the number you specify.
starting-vci
Limits the list of connections to all connections with a VCI equal to or greater
than the number you specify.
-state
Limits the list of connections to all connections that are in the state you specify.
State options are down, fail, and ok.
-owner
Limits the list of connections to all connections that use the specified ownership
role, which is either slave or master.
-sc
Service class. This option limits the list of connections to all connections that use
the specified service class. Valid service classes are cbr, rtvbr, nrtvbr, abr, and
ubr.
-persflag
Persistence flag. This option limits the list of connections to all connections that
match the specified persistence state, which is either nonpersistent or
persistent.
pref-rte-id
Preferred route ID. This option limits the list of connections to all connections
that operate on the specified route.
-type
This option limits the list of connections to all connections that match the
specified connection type, which is either p2p or p2mp.
-smconinfo
This option limits the list of connections to all connections that match the
specified level of available configuration information, which is either available
(avail) or not available (notavail).
