Figures
xviii
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Figure 4-4
Example FRSM-HS1 Front Card
4-10
Figure 4-5
Using FRASM for a STUN Connection
4-12
Figure 4-6
Using FRASM for a BSTUN Connection
4-13
Figure 4-7
Using FRASM for a FRAS BNN Connection
4-14
Figure 4-8
Example FRASM Front Cards
4-15
Figure 4-9
AUSM Cards
4-18
Figure 4-10
AUSM-8T1/E1 Front Card
4-22
Figure 4-11
IMATM-T3-T1 and IMATM-E3-E1 Front Cards and RJ48-T3T1/E3E1 Back Card
4-23
Figure 4-12
IMATM Application
4-24
Figure 4-13
IMATM Used with Remote MGX 8220
4-25
Figure 4-14
CESM Card
4-27
Figure 4-15
8-Port CESM Cards
4-30
Figure 4-16
T1/E1 Backcards
4-34
Figure 4-17
T1/E1 Redundancy Back Cards
4-35
Figure 5-1
Cisco WAN Manager Connection Manager Screen for the MGX 8220 Shelf
5-2
Figure 5-2
Frame Relay Connection through an MGX 8220 and BPX Network
5-3
Figure 5-3
ATM to-ATM Connection Screen
5-6
Figure 6-1
MGX 8220 Stand-alone Configuration
6-1
Figure 7-1
Mounting Rail Positions
7-6
Figure 7-2
Rack-Mounted MGX 8220—One- and Two-Shelf Configurations
7-7
Figure 7-3
Rack-Mounted MGX 8220—Three-Shelf, Four-Shelf, and Six-Shelf Configurations
7-8
Figure 7-4
Use the Angle Bracket to Secure the Module to the Rack
7-9
Figure 7-5
Keyhole Style Bracket
7-11
Figure 7-6
Electrostatic Wrist Strap Kit
7-12
Figure 7-7
Installed Wrist Strap Kit
7-12
Figure 7-8
Multisystem Racks
7-13
Figure 7-9
48V DC Male Power Receptacle Viewed Facing the Rear of the Shelf
7-14
Figure 7-10
PEM Cable Clamp
7-14
Figure 7-11
DC Power Cabling for One-Shelf and Two-Shelf Racks
7-15
Figure 7-12
DC Cabling for Three-Shelf and Four-Shelf Racks
7-16
Figure 7-13
AC Power Assembly Block Diagram
7-18
Figure 7-14
AC Cabling for One-Shelf and Two-Shelf Racks
7-19
Figure 7-15
AC Cabling for Three-Shelf and Four-Shelf Racks
7-20
Figure 7-16
Cable Management Kit on the Plenum Chamber
7-22
Figure 7-17
Installation of the Cable Management Kit on the Cooling Module
7-23
