manualshive.com logo in svg

Cisco MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver, User Manual, Page: 33 / 104

Share
Download
Cisco MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual Download Page 33

25

Chapter 5: Configuring the Switch through the Web Utility
System Information

24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet

System Information

The System Information tab includes links to the following screens.

•

System Description

•

System Mode

•

Forwarding Database

•

Time Synchronization

•

CPU Performance

•

Logout

System Description

The System Description screen displays the following information.

Model Name

. This displays the switch’s name.

System name

. Assign a name to the switch system, up to 255 characters long.

System Location

. Assign a name to the system location, up to 255 characters long.

System Contact

. Enter the name of the administrator responsible for the system, up to 255 characters long.

System up time

. Length of time the management agent has been up.

IP Address

. The IP Address assigned to the Switch is displayed. (The default IP address is 192.168.1.254.)

Base MAC Address

. The MAC Address of the switch is displayed.

Hardware version

. The current hardware version is displayed.

Software version

. The current software version is displayed.

Click the 

Submit

 button after you have verified that the information is correct.

Figure 5-4: Sys. Info - System Information

Summary of Contents for MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver









































































































Reviews:

No comments