1. Login to
. If this is your first time, create a new account.
2. Find the network to which you plan to add your sensor or create a new network.
3.
the sensors to your network. You will need your Meraki order number (found on your invoice) or the serial
number of each sensor, which looks like Qxxx-xxxx-xxxx, and is found on the back of the unit or included in the
box.
4. Add the gateway(MV or MR) to the
same network
as the sensor.
List of Compatible Gateways:
MV
MR
MV12(W/NE), MV22(X), MV32, MV72(X)
MR36, MR45, MR44 MR46, MR46E, MR55, MR56, MR76, MR86
Minimum Firmware Version
MV
MT sensors can only connect to a compatible MV gateway running MV 4.8+. Please refer to
to schedule an upgrade.
MR
In order to use a compatible MR device as a gateway for MT sensors, the Network in question should be set to
MR27.5.11
. This is a patch release that is based
off MR 27.5.1(latest stable) with additional support for MT sensors. Please refer to
to schedule an upgrade.
NOTE: Make sure the gateway is in the same network and is online and operational.
and
.
WARNING: Environmental Sensors are only supported with 2nd Gen MV Cameras and Wifi 6 Compatible APs
4