Pre-Install Preparation
You should complete the following steps before going on-site to perform an installation.
Collect Additional Hardware for Installation
You will need the following tools to perform an installation:
•
Cables with appropriate connectors long enough for your particular mounting location
•
Philips head screwdriver
Installation Instructions
Choose Your Mounting Location
Keep the following in mind when installing the port security mount accessory:
1.
A junction box is available at the mounting location. If not, make sure there is a cabling available at the installation location.
2.
All cabling that needs to be physically secured is available at the mounting location.
Install the MA-MNT-MR-H3
The MA-MNT-MR-H3 provides a quick and simple means of securing the Ethernet cables connected to the 4x MR30H LAN Access Ports. Please follow the
steps provided below for installation:
1. Assemble MA-MNT-MR-H3
The MA-MNT-MR-H3 will come packaged as two separate pieces: A backplate and an attachable, sliding frontplate. Attach the frontplate onto the backplate
using the side notches at the bottom of the backplate.
2. Attach Mount Cradle to MA-MNT-MR-H3
3
