S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
30
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.0(4b)
OL-21012-04
Limitations and Restrictions
Step 1
Disable SSH.
Step 2
Create RSA version 2 DSA keys.
Step 3
Enable SSH.
Step 4
Delete any RSA version 1 keys on any remote SSH clients and replace the version 1 keys with the new
version 2 keys from the switch.
Proceed with the upgrade to NX-OS Release 4.2(1b).
If you upgrade before disabling SSH and creating RSA version 2 keys, follow these steps:
Step 1
Open a Telnet session and log in through the console.
Step 2
Issue the
no feature ssh
command to disable SSH.
Step 3
Issue the
ssh key rsa 1024
command to create RSA version 2 keys.
Step 4
Issue the
feature ssh
command to enable SSH.
CFS Cannot Distribute All Call Home Information
In MDS NX-OS Release 4.2(1b), CFS cannot distribute the following Call Home commands that can be
configured with the
destination-profile
command:
•
destination-profile
profile_name
transport-method
•
destination-profile
profile_name
http
The output of the
show running-config callhome
command shows configured Call Home commands:
switch#
show running-config callhome
> version 4.1(3)
> callhome
> email-contact [email protected] <mailto:[email protected]>
> phone-c14087994089
> streetaddress xyxxyx
> distribute
> destination-profile testProfile
> destination-profile testProfile format XML
> no destination-profile testProfile transport-method email
> destination-profile testProfile transport-method http
> destination-profile testProfile http https://xyz.abc.com
> destination-profile testProfile alert-group all
> transport email smtp-server 64.104.140.134 port 25 use-vrf management
> transport email from [email protected] <mailto:[email protected]>
> enable
> commit
When you attempt to apply these commands in the ASCII configuration, the following commands fail:
> no destination-profile testProfile transport-method email
> destination-profile testProfile transport-method http
> destination-profile testProfile http
https://xyz.abc.com
To work around this issue, issue these commands after the
commit
command.
