Cisco MDS 9100 Series, Installation Manual

Page: 91 / 108

B-9
Cisco MDS 9100 Series Hardware Installation Guide
OL-16187-01
Appendix B Technical Specifications
SFP Transceiver Specifications
Optical Specifications for Cisco CWDM SFP Transceivers
Table B-18 provides the optical specifications for CWDM SFP transceivers. CWDM SFP transceivers
have an optical link budget of 28 decibels (db).
Note The parameters are specified over temperature and at end of life unless otherwise noted.
Note
When shorter distances of single-mode fiber are used, it might be necessary to insert an inline optical
attenuator in the link to avoid overloading the receiver.
Table B-17 Electrical Specifications for Cisco CWDM SFP Transceivers
Parameter Symbol Minimum Typical Maximum Units
Supply Current |
s
220 300 mA
Surge Current |
surge
+30 mA
Input voltage Vmax 3.1 3.3 3.6 V
Table B-18 Optical Specifications for Cisco CWDM SFP Transceivers
Parameter Symbol Min. Typical Max. Units Notes
Transmitter central
wavelength
λ
c
(x-4) (x+1) (x+7) nm Available
center
wavelengths:
1470, 1490,
1510, 1530,
1550, 1570,
1590, 1610 nm
Wavelength
temperature
dependence 0.08 0.1 nm/°
C
Side-mode
suppression ratio SMSR 30 dB
Transmitter optical
output power P
out
0.0 5.0 dBm Average power
coupled into
single-mode
fiber
Receiver optical
input power (BER
<10
-12
with PRBS
2
-7
–1)
P
in
-28.0 -7.0 dBm @ 2.12 Gbps,
140°F (60°C)
case temp.
Receiver optical
input wavelength
λ
in
1450 1620 Nm
Transmitter
extinction ratio OMI 9 dB