15
Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis
78-18371-01
External Network Management Requirements
InfiniBand Port Status LEDs
A port status LED indicator (green) exists next to each IB port on the
Cisco M SFS7000E InfiniBand Switch, as shown in
Figure 11
.
Table 2
describes IB port status LED
indicators. The eight ports on the IB switch module are numbered next to each LED indicator.
Switch Status LEDs
Each IB switch module includes two LEDs (one green and one bi-color, blue and amber), as shown in
Figure 11
. The power LED and the system status LED provide the overall system status for the
Cisco M SFS7000E InfiniBand Switch and are controlled by the Dell Remote Access
Controller/Modular Chassis (DRAC/MC) management board. The DRAC/MC checks whether or not the
switch blade is valid and has correct identifiers.
Table 3
describes the green-colored power LED
indicator.
Table 4
describes the bi-colored system status LED indicator.
External Network Management Requirements
You can manage the Cisco M SFS7000E InfiniBand Switch in an InfiniBand network by using the Cisco
High-Performance Subnet Manager or the Cisco Embedded Subnet Manager.
Table 2
InfiniBand Port Status LED Indicators
LED State
Indicators
On (solid)
Logical link exists
Blinking
Traffic active
Off
Link error or Subnet Manager is not running
Table 3
Switch Status Power LED Indicator
LED States
Indicators
On
Power is on
Off
Power is off
Table 4
System Status LED Indicator
LED States
Indicators
Blue off
Switch is not ready
Blue blinking
Identify
Blue solid on
Switch is on and operating normally
Amber blinking
Indicates fault
Amber solid on
Indicates fault
