Chapter 3
Advanced Configuration
9
Dual-Band Wireless-N Gigabit Router
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select
Connect on Demand
. In the
Max Idle Time
field,
enter the number of minutes you want to elapse before
your Internet connection terminates. The default Max Idle
Time is
15
minutes.
Keep Alive: Redial Period
If you select this option, the
Router will periodically check your Internet connection. If
you are disconnected, then the Router will automatically
re-establish your connection. To use this option, select
Keep Alive
. In the
Redial Period
field, you specify how often
you want the Router to check the Internet connection. The
default value is
30
seconds.
L2TP
L2TP is a service that applies to connections in Israel only.
Internet Connection Type > L2TP
Server IP Address
This is the IP address of the L2TP
Server. Your ISP will provide you with the IP Address you
need to specify here.
Username and Password
Enter the Username and
Password provided by your ISP.
Connect on Demand: Max Idle Time
You can configure
the Router to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select
Connect on Demand
. In the
Max Idle Time
field,
enter the number of minutes you want to elapse before
your Internet connection terminates. The default Max Idle
Time is
15
minutes.
Keep Alive: Redial Period
If you select this option,
the Router will periodically check your Internet
connection. If you are disconnected, then the Router
will automatically re-establish your connection. To use
this option, select
Keep Alive
. In the
Redial Period
field,
you specify how often you want the Router to check
the Internet connection. The default Redial Period is
30
seconds.
Telstra Cable
Telstra Cable is a service that applies to connections in
Australia only.
Internet Connection Type > Telstra Cable
Server IP Address
This is the IP address of the Heartbeat
Server. Your ISP will provide you with the IP Address you
need to specify here.
Username and Password
Enter the Username and
Password provided by your ISP.
Connect on Demand: Max Idle Time
You can configure
the Router to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select
Connect on Demand
. In the
Max Idle Time
field,
enter the number of minutes you want to elapse before
your Internet connection terminates. The default Max Idle
Time is
15
minutes.
Keep Alive: Redial Period
If you select this option,
the Router will periodically check your Internet
connection. If you are disconnected, then the Router
will automatically re-establish your connection. To use
this option, select
Keep Alive
. In the
Redial Period
field,
you specify how often you want the Router to check
the Internet connection. The default Redial Period is
30
seconds.
Optional Settings
Some of these settings may be required by your ISP. Verify
with your ISP before making any changes.
Optional Settings
Host Name and Domain Name
These fields allow you to
supply a host and domain name for the Router. Some ISPs,
usually cable ISPs, require these names as identification.
You may have to check with your ISP to see if your
broadband Internet service has been configured with a
host and domain name. In most cases, leaving these fields
blank will work.
