9
Chapter 5: Setting Up the Wireless-B Ethernet Bridge
Overview
Wireless-B Ethernet Bridge
Chapter 5: Setting Up the Wireless-B Ethernet Bridge
Overview
Now that you’ve connected the Wireless-B Ethernet Bridge to your wired network, you are ready to set it up. The
Setup Wizard will guide you through all the necessary steps.
Setup Wizard
1. Insert the Setup CD-ROM into your PC’s CD-ROM drive. The Setup Utility should run automatically, and the
screen in Figure 5-1 should appear. If it does not, click the
Start
button and choose
Run
. In the field that
appears, enter
D:\setup.exe
(if “D” is the letter of your CD-ROM drive).
•
Setup - Click the
Setup
button to proceed with the Setup Wizard.
•
User Guide - Click the
User Guide
button to open the PDF file of this User Guide.
•
LINKSYS Web - Click the
LINKSYS Web
button to access the Linksys website using an active Internet
connection.
•
Exit - Click the
Exit
button to exit the Setup Wizard.
2. Click the
Setup
button to begin the setup process.
3. Make sure the Bridge is correctly connected to your wired network (see Figure 5-2). Then click the
Next
button.
Figure 5-2: Check Connection
Figure 5-1: Welcome