5
RFC 2684 Bridged - Dynamic IP Address
•
For the IP Setting, select
Automatically obtain an IP
Address
.
Click
•
Save Settings
.
RFC 2684 Bridged - Static IP Address
•
For the IP Setting, select
Use
the following IP Address
.
Enter the IP Address, Subnet
•
Mask, and Default Gateway IP
address .
Enter at least one DNS IP
•
address in the
Primary DNS
and
Secondary DNS
fields .
Click
•
Save Settings
.
Bridge Mode Only
Use this mode only if you
use the Modem Router as a
bridge, which makes it act
like a stand-alone modem .
Click
•
Save Settings
.
In the web browser’s
5.
Address
field, enter the appropriate website:
www.linksys.com/uk/registration
(United Kingdom),
www.linksys.com/au/registration
(Australia),
www.linksys.com/nz/registration
(New Zealand), or
www.linksys.com/sg/registration
(Singapore) . Then press
Enter
.
NOTE FOR WIRELESS MODEM ROUTERS:
Go to
www.linksysbycisco.com/support
for instructions on wireless
configuration . You should change the default wireless settings and
enable the appropriate security method .
RFC 2684 Bridged - Dynamic IP Address
RFC 2684 Bridged - Static IP Address
Bridge Mode Only
