Cisco Linksys E1200 User Manual Download Page 26

Page: 26 / 92

Setting Up: Basics

Linksys E-Series

How to start Cisco Connect

When you run the setup CD, Cisco Connect (your router’s setup software) is

automatically installed onto your computer . You can then use Cisco Connect

to easily manage your router . To install Cisco Connect on another computer

after your router has been set up, see “How to install Cisco Connect on another

computer” on page 12 .

noTES:

Your Cisco Connect CD works with only this router model .

If you lose your setup CD, you can download the software from

Linksys.com/support

To start Cisco Connect for the first time:
1.

Insert the CD into your CD or DVD drive .

Click

Set up your Linksys Router

If you do not see this:

•

For Windows, click

Start

Computer

, then double-click the

drive

and the

Setup

icon .

•

For Mac, double-click the

icon on your desktop, then double-click

the

Setup

icon .

Follow the on-screen instructions to complete your router setup . When

setup has finished, Cisco Connect has also been installed onto your hard

drive .

After your router has been set up and Cisco Connect has been installed, you

can use Cisco Connect to easily manage many of your router’s settings .

To start Cisco Connect on a Windows computer:
1.

Click

Start

All Programs

, then click

Cisco Connect

. The Cisco Connect

main menu opens .

To start Cisco Connect on a Mac oS X computer:
1.

Open the

Applications

folder, then double-click the

Cisco Connect

icon . The Cisco Connect main menu opens .

To install Cisco Connect on another computer:
1.

See “How to connect a computer using an Easy Setup Key” on page 16 .

When finished, Cisco Connect has also been installed onto the computer’s

hard drive .

CAUTIon

After your router has been set up, do not run the setup CD to install

Cisco Connect to another computer . If you run the setup CD again,

you will be prompted to enter the router’s network name (SSID)

and password .

Summary of Contents for Linksys E1200





























































































Search results

Summary of Contents for Linksys E1200

Reviews:

Related manuals for Linksys E1200

Brands by name

Popular brands

Cisco Linksys E1200, User Manual

Search results

Summary of Contents for Linksys E1200

Reviews:

Related manuals for Linksys E1200

Brands by name

Popular brands