Appendix E
Regulatory
79
Media Center Extender
79
Media Center Extender
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter. IEEE 802.11b or 802.11g operation of
this product in the USA is firmware-limited to channels 1 through 11.
Safety Notices
•
Caution: To reduce the risk of fire, use only No.26 AWG or larger
telecommunication line cord.
•
Do not use this product near water, for example, in a wet basement
or near a swimming pool.
•
Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
WARNING:
This product contains lead, known to the State
of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
Industry Canada Statement
This device complies with Industry Canada ICES-003 and RSS210 rules.
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including interference
that may cause undesired operation of the device. This device has
been designed to operate with an antenna having a maximum
gain of 2dBi. Antenna having a higher gain is strictly prohibited
per regulations of Industry Canada. The required antenna
impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the EIRP is not more than
required for successful communication.
Industry Canada Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
