Cisco ISB7105, Product Manual

Page: 22 / 32

22
Connecting to a Stereo VCR or DVD Recorder (optional)
The diagram below shows how to connect a recording device to your receiver. Although
it is possible to watch TV using a connection through your VCR or DVD recorder to the
TV, this connection may not provide the best picture, and HDTV users are restricted to an
SD format. In addition, some content is copy protected and passing this content through
the recording device may result in a picture that cannot be viewed.
For these reasons, the connection shown is best used to provide only video and audio to
your recording device and not for normal TV viewing. The connection from the recording
device to the TV (only used for playback of recorded material) depends on the type of
device being used, the outputs that are supported, and the inputs that remain available
for use on your TV.
Consult the owner’s manuals provided with your TV and recording device for more
details on connection options.
Cables Used in this Confi guration
• 1 RCA-type Video Cable
• 1 Set Audio Left/Right Cables
Connecting your TV directly to the Audio/Video output of your receiver will
assure a more vivid picture and enhance your viewing enjoyment.
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
T
1
5
8
8
4
Receiver
NETWORK
L R
Pr Pb Y VIDEO
OUT
AUDIO
OUT
OPTICAL POWER
HDMI
®
Back of Stereo VCR
or DVD Recorder
CABLE OUT/
ANT OUT
R L
AUDIO
IN
VIDEO
IN
R L
AUDIO
OUT
VIDEO
OUT
CABLE IN/
ANT IN