Cisco IR8140H, Mounting

Page: 4 / 18

Mounting Bracket Kit
Use the mounting bracket kit if you require a Cisco mounting bracket. The mounting bracket attaches to the
mounting plate, and then the router is installed on the mounting bracket.
You can also use any compatible mounting bracket with the Cisco pole mount kit. Check with your authorized
Cisco reseller for compatible mounting brackets. See
Pole Mount Kit, on page 2 .
Figure 2: Mounting Bracket Kit Contents—Required Parts
Description Qty. Name Item
Mounts router to the mounting plate or wall. 1 Mounting bracket 1
Included Hardware
Use the hardware specified in the figure above (items
2 through 5) to attach the mounting bracket to the
mounting plate, and the router to the mounting
bracket. Assemble the washer, split-lock washer, and
bolt as described in
Assemble Bracket Hardware, on
page 12 .
12 Washer (M8) 2
12 Split lock washer (M8) 3
12 Bolt (M8 x 1.25) 4
Use the nut to align the mounting bracket to the pole
bracket when pole bracket is being used.
1 Serrated nut (M8 x 1.25) 5
Band Strap Kit
Use the straps in the band strap kit when you mount the router on a pole larger than 4.5 inches (11.4 cm) in
diameter. This installation also requires the pole mount kit and strap tool kit. See
Pole Mount Kit, on page
2 and Strap Tool Kit, on page 5 .
Mounting the Router
4
Mounting the Router
Mounting Bracket Kit