The DIN Rail can be installed on the Base IR1101 in two different orientations, horizontally and vertically.
If the Base IR1101 has an Expansion Module attached, horizontal DIN mounting is not supported.
Note
To attach the DIN rail bracket to the Cisco IR1101, follow these steps.
Mounting the DIN Rail Bracket on the Router
Step 1
First, attach the DIN rail bracket to the back of the router. The DIN rail bracket mounts in two different ways, depending
on the orientation you wish to use. See the following two figures for vertical orientation, and for horizontal orientation.
Figure 16: Attaching the DIN Rail Bracket for vertical mounting
Position the router with the ground lug facing down for vertical mounting.
Note
IR1101 Industrial Integrated Services Router Hardware Installation Guide
33
Installing the Router
Mounting the DIN Rail Bracket on the Router
