6
IG21, IG21R and IG31R Hardware Installation Guide
DIN Rail Mounting Instructions for IG21, IG21R and IG31R
Figure 3
Attaching the DIN Rail Bracket for Vertical Installation of IG21R or IG31R
F
Attaching the DIN Rail Bracket to Support Horizontal Mounting
After you attach the Adapter plate as detailed in the
Attaching the Adapter Plate for IG21R and IG31R, page 4
section and shown in
, do the following:
1.
Position the DIN rail bracket over the four mounting holes as shown in the left illustration in
. You will attach the bracket using
only the two horizontal holes.
2.
Attach the Adapter plate by using the two screws (13-15 torque) supplied and apply 13-15 inch-pound torque to tighten the plate to the
router. The screw thread diameter is 3.0 mm, the screw head diameter is 5.5 mm, and the screw length is 7.0 mm.
